Products and Plants
Bucket Wheel Type Sand Washing Plant Supplier & Exporter Of India
Convotech Engineering LLP is the production of a bucketwheel type sand washing plant for washing clay in the sand with the aim of improving the quality of sand. Due to their simple design, they simplify the assembly process; these bucket wheels benefit users with low power consumption and water savings.
It is one of the most advanced technologies for mineral and sand washing systems in India. Requires less space. Less power, easier transport, more efficient at work. It can also be used for silica sand and river sand and other sands.
Product details
Understanding the functionality of a bucket classifier and it’s dewatering screen
A bucket wheel classifier, an important component of a bucket wheel classifier plant, is utilised for effective sand washing. It operates using spinning buckets to separate and clean sand. These buckets gather sand, which is then graded and discharged, while fine materials pass through the dewatering screen. The sand then settles at the bottom of the trough.
The dewatering screen on the bucket classifier further dehydrates and separates sand from water. The incoming feed and the motion of the bucket wheel system tend to push the heavier sand away from the bottom of the classifier and into the tub. Furthermore, the screw mechanism, which functions extremely slowly, pushes the sand into the bucket wheel assembly.
It provides the required vibration for the sand to lose its water content so that the right moisture ratio of 2% is equally maintained using high-power vibro motors linked to the ceiling of the dewatering screen. This process guarantees that your sand cleaning operation is both effective and environmentally friendly. To improve precision, the dewatering screens are linked to polyurethane panels. Consider Convotech Engineering, a bucket wheel classifier provider in Ahmedabad, for high-quality equipment. They provide quality sand-washing solutions. As bucket sand washing plant exporters in India, they provide you with efficient tools that make the process simple and effective.
Technical data of Bucket Wheel Type Sand Washing Plant
| Bucket wheel classifier for 20 to 30 TPH | |
|---|---|
| Technical data of wheel washing | |
| Material | Sand |
| Density of material | 1600 kg/m³ |
| Input Capacity of classifier | 20 TO 30 TPH |
| Wheel Diameter | Ø1600 mm |
| Number of Bucket | 15 Nos |
| Screw Diameter | Ø 1400 mm |
| Water tank Capacity | 2500 Litter |
| Tank body thk | 6 mm thk |
| Bucket | 8 mm thk with PU mess |
| Gear box & motor | |
| Motor | 5 HP, 3 PHASE, 440 V |
| Speed | 1440 |
| Protection | IP 55 |
| Make | Crompton/ABB/Bharat Bijlee/ |
| Gear Box Type | PLANETORY TYPE |
| Technical data of dewatering screen | |
| Screen Size | 900X1800 mm long |
| Screen Capacity | 30 TPH |
| Operating Angle of Screen | -4 ˚ degree |
| Screen | Pu mesh |
| Vibrating Pad | Rubber pad |
| Motor | |
| Power | 1.5 + 1.5 (3 hp),3 PHASE, 440 V, 1400 rpm |
| Make | Sai deep / oli German |
| Structure | FABRICATED FROM M.S. PIPE, 8MM PLATE ISMC & ISA, AS PER CTE STANDARD DESIGN |
| Discharge Chute | Provided |
| NOTE: – Sand input size must be below 8 mm | |
| Bucket wheel classifier for 50 TPH | |
|---|---|
| technical data of wheel washing | |
| Material | SAND |
| Density of material | 1600 kg/m³ |
| Input Capacity of classifier | 50 TPH |
| Wheel Diameter | Ø2200 mm |
| Number of Bucket | 17 Nos |
| Screw Diameter | Ø 1700 mm |
| Water tank Capacity | 3500 Litter |
| Tank body thk | 6 mm thk |
| Bucket | 10 mm thk with PU mess |
| Gear box & motor | |
| Motor | 7.5 HP, 3 PHASE, 440 V |
| Speed | 1440 |
| Protection | IP 55 |
| Make | Crompton/ABB/Bharat Bijlee/ |
| Gear Box Type | PLANETORY TYPE |
| Technical data of dewatering screen | |
| Screen Size | 1200X2200 mm long |
| Screen Capacity | 50 TPH |
| Operating Angle of Screen | -4 ˚ degree |
| Screen | Pu mesh |
| Vibrating Pad | Rubber pad |
| Motor | |
| Power | 2 + 2 (4 hp),3 PHASE, 440 V, 1400 rpm |
| Make | Sai deep / oli German |
| Structure | FABRICATED FROM M.S. PIPE, 8MM PLATE ISMC & ISA, AS PER CTE STANDARD DESIGN |
| Discharge Chute | Provided |
| NOTE: – Sand input size must be below 8 mm | |
| Bucket wheel classifier for 80 TPH | |
|---|---|
| Technical data of wheel washing | |
| Material | SAND |
| Density of material | 1600 kg/m³ |
| Input Capacity of classifier | 80 TPH |
| Wheel Diameter | Ø2200 mm |
| Number of Bucket | 14 Nos |
| Screw Diameter | Ø 1800 mm |
| Water tank Capacity | 4500 Litter |
| Tank body thk | 8 mm thk |
| Bucket | 10 mm thk with PU mess |
| Gear box & Motor | |
| Motor | 10 HP, 3 PHASE, 440 V |
| Speed | 1440 |
| Protection | IP 55 |
| Make | Crompton/ABB/Bharat Bijlee/ |
| Gear Box Type | PLANETORY TYPE |
| Technical data of dewatering screen | |
| Screen Size | 1200X2500 mm long |
| Screen Capacity | 80 TPH |
| Operating Angle of Screen | -4 ˚ degree |
| Screen | Pu mesh |
| Vibrating Pad | Rubber pad |
| Motor | |
| Power | 3 + 3 (6 hp),3 PHASE, 440 V, 1400 rpm |
| Make | Sai deep / oli German |
| Structure | FABRICATED FROM M.S. PIPE, 8MM PLATE ISMC & ISA, AS PER CTE STANDARD DESIGN |
| Discharge Chute | Provided |
| NOTE: – Sand input size must be below 8 mm | |
| BUCKET WHEEL CLASSIFIER FOR 100 to 120 TPH | |
|---|---|
| Technical data of wheel washing | |
| Material | SAND |
| Density of material | 1600 kg/m³ |
| Input Capacity of classifier | 100 to 120TPH |
| Wheel Diameter | Ø2900 mm |
| Number of Bucket | 25 Nos |
| Screw Diameter | Ø 2200 mm |
| Water tank Capacity | 5500 Litter |
| Tank body thk | 8 mm thk |
| Bucket | 10 mm thk with PU mess |
| Gear box & Motor | |
| Motor | 12.5 HP, 3 PHASE, 440 V |
| Speed | 1440 |
| Protection | IP 55 |
| Make | Crompton/ABB/Bharat Bijlee/ |
| Gear Box Type | PLANETORY TYPE |
| Technical data of dewatering screen | |
| Screen Size | 1500X3000 mm long |
| Screen Capacity | 100 to 120 TPH |
| Operating Angle of Screen | -4 ˚ degree |
| Screen | Pu mesh |
| Vibrating Pad | Rubber pad |
| Motor | |
| Power | 3 + 3 (6 hp),3 PHASE, 440 V, 1400 rpm |
| Make | Sai deep / oli German |
| Structure | FABRICATED FROM M.S. PIPE, 8MM PLATE ISMC & ISA, AS PER CTE STANDARD DESIGN |
| Discharge Chute | Provided |
| NOTE: – Sand input size must be below 8 mm | |
| Bucket wheel classifier for 200 TPH | |
|---|---|
| Technical data of wheel washing | |
| Material | SAND |
| Density of material | 1600 kg/m³ |
| Input Capacity of classifier | 200TPH |
| Wheel Diameter | Ø3200 mm |
| Number of Bucket | 27 Nos |
| Screw Diameter | Ø 2600 mm |
| Water tank Capacity | 7000 Litter |
| Tank body thk | 8 mm thk |
| Bucket | 10 mm thk with PU mess |
| Technical data of dewatering screen | |
| Motor | 15 HP, 3 PHASE, 440 V |
| Speed | 1440 |
| Protection | IP 55 |
| Make | Crompton/ABB/Bharat Bijlee/ |
| Gear Box Type | PLANETORY TYPE |
| Technical data of dewatering screen | |
| Screen Size | 1800X3000 mm long |
| Screen Capacity | 100 to 120 TPH |
| Operating Angle of Screen | -4 ˚ degree |
| Screen | Pu mesh |
| Vibrating Pad | Rubber pad |
| Motor | |
| Power | 4 + 4 (8 hp),3 PHASE, 440 V, 1400 rpm |
| Make | Sai deep / oli German |
| Structure | FABRICATED FROM M.S. PIPE, 8MM PLATE ISMC & ISA, AS PER CTE STANDARD DESIGN |
| Discharge Chute | Provided |
| NOTE: – Sand input size must be below 8 mm | |
features and advantages
- Simple structure.
- Water saving.
- Low power consumption.
- Ease of installation
Get In touch
Contact Us Anytime for Help!
Convotech Engineering is synonymous with advanced engineering, cost-effectiveness, innovative thinking and custom-made solutions. We are fast emerging as a most sought-after brand in the construction and mining sectors, both in Indian and international markets.
Years
3+
Sales
200+
exports